I deleted the last post and took some more time to research, where I read the PPH book.
I gathered infomation and that is what I understood,I need to proceed the method and be successful (I live in germany btw, which is important because of the units) :
Nitrogen 2 Liter cylinder, 200 Bar, 400Liter
Pressure Reducer: DIN 477 , Gasflow cant exceed 180 Bar , which it does (200 Bar), so I have to let a bit of nitrogen escape (about 15/20 Liter per minute)
The optimal gasflow is 15Liter per minute
Oxygen detector (There should be less than 2% O2 in the cylinder)
I found a PE compression bag for clothes , which has very good material, that is robust, 50cm x 70cm
The things I am struggling with is the hose and the closure of the bag. Can I also use a cable tie , without crafting the Exit bag? And what kind of Hose do I need exactly? Is there anything I forgot or got wrong ?
Please let me know, I really want to do it all right and don´t fuck up
Thanks in advance!
I gathered infomation and that is what I understood,I need to proceed the method and be successful (I live in germany btw, which is important because of the units) :
Nitrogen 2 Liter cylinder, 200 Bar, 400Liter
Pressure Reducer: DIN 477 , Gasflow cant exceed 180 Bar , which it does (200 Bar), so I have to let a bit of nitrogen escape (about 15/20 Liter per minute)
The optimal gasflow is 15Liter per minute
Oxygen detector (There should be less than 2% O2 in the cylinder)
I found a PE compression bag for clothes , which has very good material, that is robust, 50cm x 70cm
The things I am struggling with is the hose and the closure of the bag. Can I also use a cable tie , without crafting the Exit bag? And what kind of Hose do I need exactly? Is there anything I forgot or got wrong ?
Please let me know, I really want to do it all right and don´t fuck up
Thanks in advance!
