• Hey Guest,

    An update on the OFCOM situation: As you know, censorship around the world has been ramping up at an alarming pace. OFCOM, the UK’s communications regulator, has singled out our community, demanding compliance with their Online Safety Act despite our minimal UK presence. This is a blatant overreach, and they have been sending letters pressuring us to comply with their censorship agenda.

    Our platform is already blocked by many UK ISPs, yet they continue their attempts to stifle free speech. Standing up to this kind of regulatory overreach requires lots of resources to maintain our infrastructure and fight back against these unjust demands. If you value our community and want to support us during this time, we would greatly appreciate any and all donations.

    Read more about the situation here: Click to View Post

    Donate via cryptocurrency:

    Bitcoin (BTC): 39deg9i6Zp1GdrwyKkqZU6rAbsEspvLBJt
    Ethereum (ETH): 0xd799aF8E2e5cEd14cdb344e6D6A9f18011B79BE9
    Monero (XMR): 49tuJbzxwVPUhhDjzz6H222Kh8baKe6rDEsXgE617DVSDD8UKNaXvKNU8dEVRTAFH9Av8gKkn4jDzVGF25snJgNfUfKKNC8
SomewhereAlongThe

SomewhereAlongThe

Student
May 17, 2024
194
I've been trying to put together my method (Exit Nitrogen Bag) for a while now. I've gotten the tank, it's just the regulator I've been struggling with. The last one I got was a cheap one and it was leaking in a spot I couldn't put teflon tape on. So that was a flop. I had to find a new one and it costs significantly more than the other one. On top of that I had to find the outlet connection's fitting, which was difficult.

Now that I've found the regulator and the outlet connection, I have to wait until the regulator comes and test it to see if it leaks, and this is what I'm nervous about. If it leaks then there's nothing I can do, and I might as well give up if that's the case. I'm really hoping it doesn't leak at all and everything goes well.
 
  • Hugs
  • Like
  • Love
Reactions: Whydid, requiemforadream, Namelesa and 3 others
opheliaoveragain

opheliaoveragain

Eating Disordered Junkie
Jun 2, 2024
1,873
wishing you the best. I absolutely recognize that this method is more technical than others and the frustration that likely comes with it.

we're here for you if you need to vent etc 🤍🌹🫂
 
  • Like
Reactions: parasite_eve and Forever Sleep
SomewhereAlongThe

SomewhereAlongThe

Student
May 17, 2024
194
wishing you the best. I absolutely recognize that this method is more technical than others and the frustration that likely comes with it.

we're here for you if you need to vent etc 🤍🌹🫂
Thank you! I appreciate that. And Yea it's super technical. It's going to be worth it when it's all set up though.
 
  • Hugs
Reactions: Forever Sleep and opheliaoveragain
FuneralCry

FuneralCry

Just wanting some peace
Sep 24, 2020
41,478
I wish you the best, I hope you find the relief you are searching for.
 
  • Hugs
Reactions: requiemforadream
A

*AzRaEl*

Member
Dec 27, 2024
26
I've been trying to put together my method (Exit Nitrogen Bag) for a while now. I've gotten the tank, it's just the regulator I've been struggling with. The last one I got was a cheap one and it was leaking in a spot I couldn't put teflon tape on. So that was a flop. I had to find a new one and it costs significantly more than the other one. On top of that I had to find the outlet connection's fitting, which was difficult.

Now that I've found the regulator and the outlet connection, I have to wait until the regulator comes and test it to see if it leaks, and this is what I'm nervous about. If it leaks then there's nothing I can do, and I might as well give up if that's the case. I'm really hoping it doesn't leak at all and everything goes well.
Did your new regulator arrive and did it test okay for leaks? There are so many variables with this method that I think it's worth spending money on the right equipment so that everything works as it should. This is especially true for the regulator, considering that this is needed to control the flow of gas at the right volume
 
  • Like
Reactions: SomewhereAlongThe
SomewhereAlongThe

SomewhereAlongThe

Student
May 17, 2024
194
Did your new regulator arrive and did it test okay for leaks? There are so many variables with this method that I think it's worth spending money on the right equipment so that everything works as it should. This is especially true for the regulator, considering that this is needed to control the flow of gas at the right volume
My new regulator did arrive, and it's much better quality! I tested it for leaks at first, and it leaked, it's only when I tightened it more with the wrench and redid the seal, did it work and not leak at all! None of the adjacent connections are leaking either which is really good. I bought a rubber tube that's normally used as a fuel line but I'm using it for my hose. I think it's good but I'm worried it's a little heavy for my exit bag.

1736094861624
 
  • Like
Reactions: *AzRaEl*
A

*AzRaEl*

Member
Dec 27, 2024
26
I've been trying to put together my method (Exit Nitrogen Bag) for a while now. I've gotten the tank, it's just the regulator I've been struggling with. The last one I got was a cheap one and it was leaking in a spot I couldn't put teflon tape on. So that was a flop. I had to find a new one and it costs significantly more than the other one. On top of that I had to find the outlet connection's fitting, which was difficult.

Now that I've found the regulator and the outlet connection, I have to wait until the regulator comes and test it to see if it leaks, and this is what I'm nervous about. If it leaks then there's nothing I can do, and I might as well give up if that's the case. I'm really hoping it doesn't leak at all and everything goes well.
Did your new regulator arrive and did it test okay for leaks? There are so many variables with this method that I think it's worth spending money on the right equipment so that everything works as it should. This is especially true for the regulator, considering that this is needed to control the flow of gas at the right
My new regulator did arrive, and it's much better quality! I tested it for leaks at first, and it leaked, it's only when I tightened it more with the wrench and redid the seal, did it work and not leak at all! None of the adjacent connections are leaking either which is really good. I bought a rubber tube that's normally used as a fuel line but I'm using it for my hose. I think it's good but I'm worried it's a little heavy for my exit bag.

View attachment 157762
I had also been considering an inert gas hose, with the intention that it would remove the requirement to have an adaptor connection that had to be clamped. My logic being that fewer connectors / adaptors in the set-up, the less the chances of a leak but I realised that the industrial hoses are heavy and seems to want to detach from the inside of the bag. Adding more tape didn't help, as when the bag is placed on the head and scrunched down before filling with gas, the hose doesn't want to compress so makes emptying the bag of air difficult. End result is I'm going with a clear pvc hose and an adaptor to connect it to the regulator
 
  • Like
Reactions: parasite_eve
Whydid

Whydid

You can ask what you want to the satellite
May 6, 2024
71
I've heard of people failing with this method, I wish I could be of more help 😞 helium bag is also very risky. I'm here to chat if you ever need to ❤️
 

Similar threads

A
Replies
0
Views
49
Suicide Discussion
Athina_99
A
WithinMySoul
Replies
9
Views
558
Suicide Discussion
grapevoid
grapevoid
lavender-heart
Replies
5
Views
606
Suicide Discussion
Swiss.la
S
ForeverCaHa
Replies
0
Views
90
Suicide Discussion
ForeverCaHa
ForeverCaHa
I
Replies
1
Views
285
Suicide Discussion
pthnrdnojvsc
pthnrdnojvsc